Multitool-USA's Plug and Play Belt and Disc Grinder offers multiple work surfaces and allows for material removal up to 5 times faster than with the equivalent grit-grinding wheel. It is available in belt size 2 x 36 in. or 2 x 48 in. mounted on a 6-in., 0.75 horsepower motor or 8-in., 1 horsepower motor.

In addition to its grinding stone, the Multitool has four different work surfaces to cover almost any grinding need. The most widely used surface is the front contact wheel, which has a serrated surface to make grinding and deburring very controllable and smooth. The top platen can be used for straightening or profiling longer edges, and the underside of the Multitool has a slack belt area for blending and finishing. The 7-in. disc on the side can be used with or without the optional miter table for beveling and profiling or final finishing.

Belts change in seconds from grinding to sanding, deburring or polishing. A variety of belts and discs are available for any type of project.

For more information, please visit multitool-usa.com.